WYBOT S2 Solar with Solar-Powered Charging Dock Robotic Pool Cleaner

The WYBOT S2 Solar is described by WYBOT as the world’s first underwater solar-powered robotic pool cleaner. It cleans floors, walls, and waterlines, and instead of being removed to charge, it returns on its own to an underwater solar-powered charging dock when the battery runs low, so it can keep your pool clean with very little handling.

A brushless motor drives cleaning, and the cleaner runs over 2.5 hours per cycle, recharging between cycles by solar so it can operate continuously. When the battery drops below 20 percent, the S2 Solar automatically returns to its dock to recharge. Dual charging lets you use solar or a DC charger as needed. It covers pools up to 3,229 square feet.

Its 3D Adsorption System pairs a 180 micron filter box with a 40 ppi ultra-fine sponge to capture both large and fine debris. Through the WYBOT app you can set weekly schedules with custom times and modes for each day, and start or return the cleaner with one click. The S2 Solar Vision adds an AI camera to this platform.

• Underwater Solar Charging Dock: The S2 Solar returns to its dock on its own when the battery drops below 20 percent and recharges by solar, so you do not have to fish it out to charge.
• Continuous, Hands-Free Operation: It runs over 2.5 hours per cycle and recharges between cycles, keeping the pool clean on a schedule with little handling.
• Dual Charging, Solar and DC: Use solar power for hands-free operation, or a DC charger when you want a faster top-up.
• Comprehensive Cleaning: Cleans floors, walls, and waterlines across pools up to 3,229 square feet.
• 3D Adsorption Filtration: A 180 micron filter box plus a 40 ppi ultra-fine sponge capture debris of all sizes, from leaves to fine dust.
• Scheduling and One-Click Control: Set weekly schedules with custom times and modes per day, and start or return the cleaner with one click in the WYBOT app.

The S2 Solar suits owners of in-ground pools up to 3,229 square feet who want a cleaner that recharges itself and runs on a schedule, with minimal handling. It is a strong fit for owners tired of pulling a cleaner out of the water to charge it each week. Because it relies on a waterline charging dock, it is designed for in-ground pools.

It cleans floors, walls, and waterlines and handles all common pool shapes and surfaces. Note that underwater app communication can occasionally be slower than above water, so WYBOT recommends using the schedule for reliable hands-free operation. For added AI camera debris detection, the S2 Solar Vision builds on this same platform.

1. Set up the dock: Position the solar charging dock at the waterline as directed in the manual so the cleaner can return to it and the panel receives sunlight.
2. Charge before first use: Charge the cleaner fully before the first run, using solar at the dock or the DC charger. Make sure the charging port is dry before connecting the DC charger.
3. Install the app and pair: Download the WYBOT app, create or sign in to an account, and connect over Wi-Fi.
4. Set a schedule: Use the app to set weekly cleaning times and modes for each day so the cleaner runs and recharges on its own.
5. Empty the basket: Lift the cleaner out periodically to empty and rinse the filter box and sponge, then return it to the pool.