WYBOT M1 Cordless Robotic Pool Cleaner

The WYBOT M1 is WYBOT’s long-runtime workhorse, built for large pools. A 10,000 mAh battery gives it up to 300 minutes of runtime on a single charge, and it covers pools up to 4,305 square feet, cleaning floors, walls, and waterlines. A 120 watt brushless motor drives strong suction, and dual high-adhesion drive lets it climb walls.

Filtration is double-level: a 6 liter, 180 micron filter basket captures larger debris, and a cotton foam layer adds fine-particle capture. Through the WYBOT app you can choose seven cleaning modes and six paths and set a cycle timer for up to four cleanings a week. When finished or low on battery, the M1 parks at the pool wall for easy retrieval.

The M1 is a straightforward, powerful cleaner: it does not use a camera or smart sensors, relying instead on path planning and long runtime to cover large pools. If you want AI camera debris detection that targets the dirtiest areas, the M2 Vision adds that on the same long-runtime platform.

• Long Runtime for Large Pools: A 10,000 mAh battery delivers up to 300 minutes per charge, covering pools up to 4,305 square feet.
• Full Coverage with Wall Climbing: Cleans floors, walls, and waterlines, using a 120 watt brushless motor and high-adhesion drive to climb walls.
• Double-Level Filtration: A 6 liter, 180 micron filter basket captures larger debris, and a cotton foam layer traps finer particles.
• 7 Modes and 6 Paths: Choose cleaning modes and paths in the WYBOT app, and set a cycle timer for up to four cleanings a week.
• Simple and Powerful: The M1 relies on path planning and long runtime rather than cameras or sensors, which keeps operation simple.
• Smart Self-Parking: Returns to the pool wall when finished or low on battery for easy retrieval.

The M1 suits owners of large in-ground pools, up to 4,305 square feet, who want long runtime and full coverage of floors, walls, and waterlines without paying for camera-based navigation. Its long battery life lets it cover large pools in a single cycle, and the cycle timer keeps the pool clean on a schedule.

Because it relies on path planning rather than sensors, the M1 cleans methodically but does not target debris the way a camera-equipped model does. If you want the cleaner to focus on the dirtiest areas of the floor and clean them faster, the M2 Vision adds an AI camera on the same 120 watt, 10,000 mAh, 4,305 square foot platform.

1. Charge the unit: Charge the M1 fully before first use. Turn the unit off before charging, and make sure the charging port is dry. Twist the port cover tightly before placing the unit back in the water.
2. Install the app: Download the WYBOT app, create or sign in to an account, and connect. Set your pool shape and material if prompted.
3. Choose a mode: Select a cleaning mode and path in the app, and set the cycle timer for recurring cleanings if desired.
4. Place and run: Lower the M1 into the pool and start the cycle.
5. Retrieve and clean: When it parks at the wall, lift it out, then remove and rinse the filter basket and foam under a hose. Store the unit out of direct sunlight.