Beatbot Sora 30 Robotic Pool Cleaner

The Beatbot Sora 30 is a cordless robotic pool cleaner that deep cleans the floor, walls, waterline, and shallow platforms down to 8 inches. It does not clean the water surface, which keeps its price below the surface-cleaning Sora 70 while still covering the areas where most debris settles. SonicSense ultrasonic sensors with AI plan an S-shaped path and steer it around ledges, swim-outs, and custom layouts.

A 6,800 GPH flow rate captures everything from fine sand to algae in a single pass, and a 10,000 mAh battery delivers up to 5 hours of cleaning, enough to finish most pools in one session regardless of debris load. A 5 L basket and a 150-micron filter handle everyday debris, with an optional 3-micron filter available for very fine particles.

When a cycle ends or the battery drops below 12 percent, intelligent floating chambers lift the unit to the surface and guide it to the pool edge, so there is no reaching into deep water to retrieve it.

• Complete Below-Water Cleaning: Cleans the floor, walls, waterline, and shallow platforms down to 8 inches, reaching tanning ledges and swim-outs that often need manual cleanup.
• 6,800 GPH Suction: A high flow rate (25,700 LPH) captures heavy debris in a single pass without clogging.
• SonicSense Navigation: Dual ultrasonic sensors with an AI processor plan an S-shaped path and avoid obstacles for complete coverage.
• Front and Rear Dual Brushes: Two roller brushes deliver wider coverage, tighter turns, and stronger traction for climbing walls and removing more debris per pass.
• 10,000 mAh Battery, Up to 5 Hours: A high-capacity battery cleans most pools in a single session regardless of size or debris load.
• 5 L Basket with Optional Fine Filter: A large basket and 150-micron filter handle daily debris, and an optional 3-micron filter captures much finer particles for crystal-clear water.
• Auto-Surfacing Retrieval: Intelligent floating chambers lift the unit to the surface and guide it to the pool edge when cleaning finishes or the battery runs low, with no diving required.
• App and Offline Control: Run it from the Beatbot app over Wi-Fi or Bluetooth, or start it directly without a connection.

The Sora 30 suits owners of in-ground and above-ground pools who want complete underwater coverage and deeper shallow-area reach without paying for surface cleaning. It covers pools up to about 3,200 square feet and works on concrete, vinyl, fiberglass, and ceramic tile.

It is a strong fit for pools with tanning ledges, beach entries, or sun shelves, since it cleans shallow platforms down to 8 inches. It is rated for saltwater pools with salt below 5,000 ppm, which covers nearly all residential pools.

Compared with the entry Sora 10, the Sora 30 adds a larger 10,000 mAh battery, deeper shallow reach, and an optional ultra-fine filter. If you already skim the surface or do not need it, the Sora 30 covers the areas that do most of the work.

1. Charge the unit: Charge the Sora 30 fully before the first run.
2. Install the app and pair: Download the Beatbot app, create or sign in to an account, and connect over Wi-Fi (2.4 GHz or 5 GHz) or Bluetooth.
3. Choose a mode: Select one of the three cleaning modes. Set the mode before submerging the unit, since the wireless link drops once it is underwater.
4. Drop and run: Lower the unit into the water and start the cycle so it can plan its S-shaped path.
5. Collect and recharge: When the cycle ends, the unit surfaces and moves to the pool edge on its own. Lift it out, rinse the 5 L basket, and recharge.