Beatbot AquaSense 2 Robotic Pool Cleaner

The Beatbot AquaSense 2 is a cordless 3-in-1 robotic pool cleaner that handles the core underwater work: the floor, the walls, and the waterline. A four-motor system drives cleaning and wall climbing, and the unit scrubs the waterline twice on each pass to lift oils and buildup that single-pass cleaners leave behind.

It navigates with Beatbot’s CleverNav system and SonicSense ultrasonic pool mapping, using 16 high-precision sensors, including two ultrasonic sensors, to plan efficient paths and avoid obstacles. A 10,000 mAh battery runs up to 4 hours of continuous floor cleaning, enough to cover a pool as large as 3,230 square feet in one session.

When a cycle ends or the battery runs low, an industry-first smart return system parks the unit at the surface, and SmartDrain releases trapped water so it lifts out easily. It charges on a vertical wireless dock in about 4 hours.

• 3-in-1 Underwater Cleaning: A four-motor system cleans the floor, climbs and scrubs the walls, and cleans the waterline in one device.
  • Dual-pass waterline scrubbing lifts oils and buildup more thoroughly than single-pass cleaners
  • Four guide wheels improve edge and corner cleaning
• 5,500 GPH Suction: Strong suction captures leaves, hair, sand, and insects in a single pass.
• SonicSense Navigation: CleverNav smart navigation with SonicSense ultrasonic pool mapping uses 16 sensors, including two ultrasonic, for full coverage and obstacle avoidance. It maps with ultrasonic sensing rather than a camera.
• Smart Surface Parking: When cleaning finishes or the battery is low, the unit returns to the surface, and SmartDrain releases trapped water so it lifts out lightweight. This is surface parking for easy pickup, not surface skimming.
• 10,000 mAh Battery: Runs up to 4 hours of continuous floor cleaning and covers pools up to 3,230 square feet on a single charge.
• Wireless Charging Dock: A vertical wireless dock charges the unit fully in about 4 hours, with no cables to connect.
• Automotive-Grade Coating: An IMR coating resists sun exposure, insulates heat, and protects internal components, so the unit keeps looking new.

The AquaSense 2 suits owners of in-ground and above-ground pools who want dependable underwater cleaning of the floor, walls, and waterline without paying for surface skimming or water clarification. It covers pools up to 3,230 square feet and works across all common pool shapes, including rectangular, round, kidney, and freeform.

It cleans steps when they are wide enough and the water on the step is deeper than about 1 foot, and it is rated for saltwater pools with salt below 5,000 ppm, which covers nearly all residential pools.

As the entry model in the AquaSense 2 series, it shares the same cordless design, navigation, and engineering as the Pro and Ultra, while focusing on the underwater areas that most pool owners want handled first.

1. Charge on the dock: Place the unit on its wireless charging dock and charge fully before the first run. A full charge takes about 4 hours.
2. Install the app and pair: Download the Beatbot app, create or sign in to an account, and connect over Wi-Fi (2.4 GHz or 5 GHz) or Bluetooth.
3. Choose a mode: Select a cleaning mode. You can switch modes from the app while the unit is in the water or on shore.
4. Drop and run: Lower the unit into the water and start the cycle so it can map the pool and plan its path.
5. Collect and recharge: When the cycle ends, the unit parks at the surface. Lift it out using the SmartDrain handle, rinse the 2 L basket, and return it to the dock.